Hammel Shredders Inventory

Basic Hammel Specifications, Caterpillar C4.4 Engine (Approx. 106kW/145 PS), Tracked Undercarriage, 9/9 Shafts with 6 Knives Per Disc, Breaker Bar, Overbelt Magnet, Foldaway Hopper Extension, Discharge Height > 3m, Remote Control

Manufacture Date: 10/2019 Hours in Operation: approx. 350 Drivetrain Diesel CAT - C4.4 Power Output 140 PS Configuration track system with track protection, foldable hopper flap and hopper extension, over-belt magnet, remote control Weight approx. 10 t Tool 6 knives - 9/9 discs (reconditioned) breaker bar (reconditioned) All shafts changeable per request Color RAL 3020 red

construction year: 03 / 2015 operating hours: approx. 1300 h drive: CAT C9 power: approx. 261 kW / 350 HP weight: approx. 20 t shafts: according to agreement version: track system with track protection over-belt magnet remote control

Hydraulic recycling machine with 2 slow running tool shafts Available in 3 models: D (wheeled), DK (tracked), and E (tracked). Suitable for Wood (Old wood, construction & demolition wood, rhizomes, green waste, pallets, cable drums) or Rubbish (Domestic waste, industrial and commercial waste) Advantages: High performance Low energy consumption Low noise Minimal dust formation Long service life of the tools

Manufacture Date: 11/2019 Hours in Operation: approx. 150 Drivetrain Diesel Cummins B 6.7 Stage 5 with exhaust module + Ad-Blue Power Output approx. 275 hp Configuration hooklift frame, wheel axle, over-belt magnet, water sprinkling system Weight approx. 20 t Tool 5 knives 7/7 discs (reconditioned) breaker bar with combs (reconditioned) All shafts changeable per request Colour RAL 3020 red

Basic Hammel Specifications, Cummins B 6.7 Stage 5 Engine, Approx. 209 kW / 280 PS Horsepower, Shafts: 7/7 Discs with 5 Knives Per Disk (Reconditioned) , Breaker Bar with Combs (Reconditioned), Mobile Hook Lift Frame, Wheel Axle, Overbelt Magnet, Water Sprinkling System, Discharge Height > 3m, Remote Control

Hydraulic recycling machine with 2 slow running tool shafts Available in 3 models: D (wheeled), DK (tracked), and E. Suitable for Wood (Old wood, construction & demolition wood, rhizomes, green waste, pallets, cable drums) or Rubbish (Domestic waste, industrial and commercial waste) and Paper, paper rolls Advantages: High performance Low energy consumption Low noise Minimal dust formation Long service life of the tools

Basic Hammel Specifications Hook Lift as Container Cummins 350 Hp Engine Shafts 5/7/7 Wheel Axle Over Belt Magnet Fully Serviced  

Basic Hammel Specifications, Caterpillar C13 Motor 480 Horsepower, Refurbished Shafts, Breaker Bar, Remote Control W/ Emergency Stop, Cross Belt Magnet, Hydraulic Folding Discharge Conveyor, Cleaned, Painted, Serviced

drive: CAT C9.3 T4i with exhaust module power: approx. 261 kW / 350 HP Weight: approx. 20 t shafts*: 5 knives with 7/7 discs (reconditioned) breaker bar with combs (reconditioned) version: wheel axle over-belt magnet water sprinkling system

Basic Hammel Specifications, Caterpillar C9.3 Stage 5 Diesel Engine, Approx. 280 kW /380 PS Horsepower, Shafts: 7/7 Discs with 5 Knives Per Disc (Reconditioned), Breaker Bar with Combs (Reconditioned), All Shafts Upon Request, Wheel Axle, Overbelt Magnet, Water Sprinkling System, Discharge Height > 4m, Remote Control

Hydraulic recycling machine with 2 slow running tool shafts Available in 3 models: D (wheeled), DK (tracked), and E. Suitable for Wood (Old wood, construction & demolition wood, rhizomes, green waste, pallets, cable drums) or Rubbish (Domestic waste, industrial and commercial waste) and Paper, paper rolls, aluninum profiles and bales Advantages: Increased performance for more throughput low energy consumption Very easy to maintain User-friendly handling by IFM control Better accessibility of the control panels Low noise Tilt funnel with increased inclination for optimum material flow Mobile on a chain or semi-mobile on a hooklift

Manufacture Date: 06/2019 Hours in Operation: approx. 400 Drivetrain Diesel Cummins QSB12-C513 Tier 4 Final Power Output approx. 525 hp Configuration track system, over-belt magnet, water sprinkling system Weight approx. 38 t Tool 5 knives 7/7 discs (reconditioned) breaker bar with combs (reconditioned) All shafts changeable per request Colour RAL 3020 red

Hydraulic recycling machine with 2 slow running tool shafts Available in 3 models: D (wheeled), DK (tracked), and E. Suitable for Wood (Old wood, construction & demolition wood, rhizomes, green waste, pallets, cable drums) or Rubbish (Domestic waste, industrial and commercial waste, bulky waste, mixed building waste, tires) and Paper, paper rolls, alunminum profiles and bales Advantages: High performance Low energy consumption Low noise Minimal dust formation Long service life of the tools

Basic Hammel Specifications, Caterpillar C18 710 HP Diesel Engine, 8/10/10 Shafts, Working Length of Shafts 100 Inches, Outer Diameter of the Shafts 35 Inches, Breaker Bar with Combs, Remote Control, 20” Pads, 96,000 Pounds, Cross Belt Magnet, Hydraulic Folding Discharge Conveyor, Water Sprinkling System, Refurbished, Cleaned, Painted, and Serviced @ Hammel Factory

Basic Hammel Specifications Caterpillar C18 710HP Diesel Engine 8/10/10 Shafts Breaker Bar with Side Combs 20” Pads 96,000 Pounds Totally Cleaned and Painted

Hammel VB 950 DK Shredder Serial Number 151 2012 Model 4,454 Hours Basic Hammel Specifications Caterpillar C 18 710HP Diesel Engine 8/10/10 Shafts Breaker Bar with Side Combs 20” Pads Cross Belt Magnet 96,000 Pounds Cleaned and Serviced Freight Collect from Baltimore

Basic Hammel Specifications, Caterpillar C18 Motor, 8/10/10 Shafts, Working Length of Shafts: 100”, Outer Diameter of Shaft: 35”, Breaker Bar, Water Sprinkling System, Cross Belt Magnet, Remote Control w/ Emergency Stop, Tracked Undercarriage, Hydraulic Folding Discharge Conveyor, Hydraulic Tipping Hopper

Basic Hammel Specifications Drive: CAT C18 Diesel engine Hydrostatic gearbox with regulating hydraulic drive motors Shafts: Shafts: 8 knives 10/10 discs Working length of the shafts: ca. 100 inches Working width: ca. 70 inches Breaker Bar with Combs Automatic shafts-return rotating system pressure controlled Conveyor: Discharge conveyor belt Hydraulically controlled discharge height Folding conveyor for transport   Hydraulic Tipping Hopper Tracked Undercarriage Cross Belt Magnet Reversible Ventilator Remote control with Emergency Stop Cleaned and Serviced

Hammel VB 950 DK Shredder Serial Number 250 2018 Model 3,300 Hours Basic Hammel Specifications Caterpillar C18 710HP Diesel Engine 8/10/10 Shafts Breaker Bar Remote Control 20” Pads 96,000 Pounds Cross Belt Magnet Cleaned and Serviced Freight Collect from Baltimore

Hydraulic recycling machine with 2 slow running tool shafts also as MD Available in 2 models: DK (tracked), and E (tracked) Suitable for Wood (Old wood, construction & demolition wood, rhizomes, green waste, pallets, cable drums) or Rubbish (Domestic waste, industrial and commercial waste, bulky waste, mixed building waste, tires) and Paper, paper rolls, alunminum profiles and bales Advantages: High performance Low energy consumption Low noise Minimal dust formation Long service life of the tools

Hammel Shredder VB 1500 DK (Diesel) Serial Number: Q2013 2013 Model, 1,100 Hours (approx.) Basic Hammel Specifications Built on Stable Frame 2x CAT C18 Diesel Engine approx. 755 HP = 1510 HP Hydrostatic Gearbox with Regulating Hydraulic Drive Motors Special Patented Shaft System • 8 Knives 12/12 discs (for metal processing) • Rotation of Shafts approx. 28rpm • Working Shaft Length ca. 10’ • Outer Diameter of Shafts measured over knives ca. 2’10” Automatic Shafts-Return Rotating System Pressure Controlled Discharge • Conveyor Belt Width 4’7” • Height: approx. 15’9” • Conveyor Belt made of Rubber and Folds for Transport • Hydraulic Height Adjustment 3-Piece Hopper • 1 Main Hopper in the Center • 2 Tilting Hoppers in the Front and Rear • Separate Controls Remote Control with Emergency Stop Includes Options: • Track System with Remote Control • Breaker Bar with Comb Freight Collect from West Palm Video: https://www.youtube.com/watch?v=KZgTfWDpP5Y

Double diesel-hydraulic drive Two-sided force transmission into the special intermeshing tool shafts Two-piece large-volume tilt funnel, each with separate control Suitable for car bodies, aluminum profiles and bales, engine blocks, mixed scrap, light metal scrap Advantages: Enormous throughput in the metal sector Maximum mobility through chain drive Easy operation by mobile PLC Better material supply through two-split tipping funnel Low wear

construction year: 02 / 2020 operating hours: approx. 200 h drive: Diesel CAT C9.3 Tier 4i power: approx. 261 kW / 350 HP weight: approx. 16 t screen basket*: mesh size 60 x 90 mm (reconditioned) rotor: 55 knives version: hook-lift frame over-belt magnet metal detector water sprinkling system

construction year: 08 / 2019 operating hours: approx. 50 h drive: electric drive system externally powered power: approx. 24,4 kW weight: approx. 14 t version: vibro finger screen magnetic drum (permanent) discharge belt (FE) discharge belt (NE) oversized conveyor belt hydraulic aggregat for folding the belts

construction year: 07 / 2020 operating hours: new in stock drive: electric drive system externally powered power: approx. 8,5 kW weight: approx. 8,2 t version: hook lift sorting belt 4 sorting slots discharge belt with roof and stairs hydraulic aggregat for folding the belt